Distech Controls ECLYPSE APEX User Manual

72 ECLYPSE APEX
Item Description
Click to copy the access token to the clipboard.
Click to refresh the information in the list.
Apply Click
Apply
to apply and save the changes
Setting Up the SSO Functionality
This section explains how to setup the SSO functionality by setting up the SSO Server first, followed
by the SSO Client. For more information, see Single Sign On (SSO) Settings.
An SSO server must be configured with a static IP address. If the SSO server IP address changes, you will have to
reconfigure all SSO clients with the new IP address. See Ethernet.
SSO functionality is only available in HTTPS mode. See Web Server Access for more information on enabling HTTPS.
Setting up the SSO Server
1. Open a web browser.
2. Enter the IP address of the controller that will become the Server (e.g., 192.168.0.10). The
ECLYPSE Login page is displayed.
3. Enter your credentials to log in. The ECLYPSE home page is displayed.
4. In the Users menu, select the Server Settings tab and make sure the Server Mode is set to On.
Figure62: SSO Server Settings
5. In Type, select Single Sign On (SSO).
6. In Access Token, an access token is displayed by default. If required, you can generate a new
access token or manually enter a custom access token. This exact access token will be needed to
setup the Client server (see next procedure Setting Up the SSO Client).
7. Click Apply.
Setting Up the SSO Client
1. Open a web browser or a new tab in the current Web browser.
2. Enter the IP address of the controller that will become the Client (e.g., 192.168.0.22). The
ECLYPSE Login page is displayed.
3. Enter your credentials to log in. The ECLYPSE home page is displayed.
ECLYPSE Web Interface

Distech Controls ECLYPSE APEX Specifications

General

Brand	Distech Controls
Model	ECLYPSE APEX
Category	Control Systems
Language	English