Distech Controls ECLYPSE ECY-303 User Manual

10 ECY-303 Preloaded Applications
Accessing the ECY-303 with ENVYSION
You can access the ECY-303 Preloaded Applications through the Xpress Network Utility. Refer to the
Xpress Network Utility User Guide for more information.
You can also access the ECY-303 Preloaded Applications directly through your web browser using the
controller IP address or using the Controller’s Factory-default Hostname.
For more information regarding the different ways to access the configuration page, refer to the
ECLYPSE Connected Equipment Controller Hardware Installation Guide.
Logging on to the Web Interface
When logging on to the web interface, you will be prompted to choose the project you would like to
work with, in this case choose the ECY-303_RTU project.
Figure1: Choose your project when accessing the controller through the Web Interface.
Graphic Page
The ECY-303 Preloaded Applications Graphic Page, similar to the figure below, opens once you enter
the ENVYSION viewer and click the
Graphic
from the navigation menu on the left.
Accessing the ECY-303 with ENVYSION

Distech Controls ECLYPSE ECY-303 Specifications

General

Brand	Distech Controls
Model	ECLYPSE ECY-303
Category	Controller
Language	English