Distech Controls ECLYPSE ECY-303 - Output Configuration Setup

70 ECY-303 Preloaded Applications
Setting up the Output Configuration
From the Allure EC-Smart-Vue’s Output Configuration menu, the controller’s output parameters can
be viewed and adjusted.
To enter the advanced menus:
1. Hold the Menu button for five seconds:
°F
pm
5 sec
The password field appears.
2. Use the arrow keys to increase or decrease the displayed number until it matches the configured
password.
Screen timeout: 15 s
By default, the password is 9995.
3. Press the Menu button to submit the password.
Screen timeout: 15 s
Upon submitting the correct password, the advanced menu is displayed.
4. Press the Menu button several times until the OUT CFG menu appears on the display.
Press several times
5. Use either of the arrow keys to enter the Output Configuration submenu.
Screen timeout: 30 s
Allure EC-Smart-Vue Screen-by-Screen Guide