DOGA DPC TOUCH V2 - Operating - Management of Buttons in Operating Mode

User manual DPC Touch V2 DOC.60352-11/20
20
3.3.2 Operating - Management of buttons in operating mode
Parameters
Description
Range
Default
value
«Next»
button access
without
password
Allows access to Next button without
entering password. If turned OFF, the
password will be required when Next
button is pressed.
ON/OFF
ON
«Back» button
access without
password
Allows access to Back button without
entering password. If turned OFF the
password will be required when Back
button is pressed.
ON/OFF
ON
«Reset»
button access
without
password
Allows access to Reset button without
entering password. If turned OFF the
password will be required when Reset
button is pressed.
ON/OFF
ON
Job selection
access without
password
Allows access to Jobs selection without
entering password. If turned OFF the
password will be required when Job
selection button is pressed.
ON/OFF
ON
Display «job
reset» button
Job reset button can be displayed or
hidden by using this parameter.
NOTE: if turned OFF and automatic
reset is used, then the current step will
be reset instead of the current job.
ON/OFF
ON