User manual DPC Touch V2 DOC.60352-11/20
4.4 Menu - Job Manager
The programming menu is the administrator interface.
It offers total access once the password is entered in the login screen.
The job manager interface provides access to the saved jobs. It allows editing
and deleting saved jobs, as well as creating new ones by simply pressing the
New button or by Copying an existing job. The load button is used to load
selected job into operating mode.
Information
If the controller is locked, the only active buttons are Load and Home.
The other buttons are locked.
Each job has a sequential number (№). In order to change the job number, tap
the job once and then change its position in the list by using the Up and Down
buttons.
Warning
Changing the order of jobs is not automatically updated in the
assignment of barcodes.
For information purposes, the number of steps and screws in a job is
displayed on the corresponding line in the list.
HOME button provides access to the main menu screen.
Maximum number of jobs is 255.
To Next Page
Loading...
