- Rotating Atomizer with External Charging
Version:: 07 • As of:: 01/2020
- Replace the bell disk
Bell disk not attached correctly
- Thoroughly clean the shaft and turbine
Reattach the bell disk
Dirty bell disk
- Clean the bell disk
Reattach the bell disk
Distance between control air ring and bell
disk incorrect
- Install atomizer body, paint tube, turbine,
and valve block correctly
Dirty shaping air ring
- Clean the shaping air ring
Damaged shaping air ring
- Replace the atomizer body
Incorrect turbine speed
- Correct speed (wrong parameter)
Blocked nozzle
- Clean the nozzle
- Replace the nozzle
To Next Page