Rev 0.1
Dr.coffee Service Manual 20
HMI Version: Current Software Version Info of Mainboard;
Machine S/N: Series Number of the machine
Baverage DB Version: Current Beverage DB Version
Machine Param.DB Version: Current Machine Param.DB Version
System Version: Current Machine System Version
Machine Info.
Machine Info: Scan the QR picture to see the info below;
1. Model: Model of the machine;
2. HMI Version: Current Software Version Info of HMI;
3. Control Version: Current Software Version Info of Mainboard;
4. IMEI: The IMEI info of 4G Model; (This function is only available for IOT models.)
5. SIM No: The info of SIM card; (This function is only available for IOT models.)
6. IOT No: The number of IOT in the machine; (This function is only available for IOT models.)
7. Enterprise No: The number of Enterprise this machine belongs to; (This function is only available for IOT models)
8、Net State：The info of Net State (This function is only available for IOT models.)
6.3.7 Power Off
Tap “Power Off” to see the interface above “Back or Power off” for your choice, machine will proceed the process if no response in 10 seconds. Start rinsing process before power off
Tap “Confirm”, start rinsing automatically, screen turned off and power off (press more than 5 seconds to wake up machine)
Tap “Return”, return to top level automatically.
To Next Page
Loading...
