Dr.coffee M12 - Drip Tray Is Not in Place; Drip Tray Is Full up; Waste Water Bucket Is Full

Rev 0.1
Dr.coffee Service Manual 45
8.1.4 Drip Tray Is Not In Place
Showing in the Screen
Cause
Solutions
a) Not well fixed；
b) The sensor doesn’t work;
c) The induction magnet is missing or
damaged
➢ Replace and fix the drip tray
➢ Change sensor；
➢ Change induction magnet；
8.1.5 Drip Tray Is Full Up
Showing in the Screen
Cause
Solutions
a) The wastewater in the drip tray has
reached the detection position
b) The sensor is dirty.
➢ Remove the water drip tray and empty the
water, and rinse it off under running water.
➢ Dry up the detective sensor
8.1.6 Waste Water Bucket is Full
Showing in the Screen
Cause
Solutions
a) Waste water bucket is full
b) The sensor is dirty；
➢ Remove the waste water bucket and
empty the water;
➢ Dry up the detective sensor
（ This function is only available for customized models ）