Dr.coffee M12 - Pre-Brewing(S); Coffee (Ml); Cold Water(Ml); Circle-Index

Rev 0.1
Dr.coffee Service Manual 25
7.1.3.11 Pre-brewing(s)
The coffee powder pre-soaking time, unit: S, setting level: 0~5
7.1.3.12 Coffee (ml)
The amount of coffee flowing out, unit: ml. Setting level: See the screen numerical on the interface, different beverage with different beverage value limits.
7.1.3.13 Cold water(ml)
The amount of warm water flowing out, unit: ml. setting level: See the screen numerical on the interface, different beverage with different beverage value limits.
7.1.3.14 Circle-index
Brewer working times of beverage making. Choices: 1~5
7.1.3.15 Brew Pressure
The pressure of coffee making Choice: Yes, No (“Yes” means making coffee with presser; No means making coffee without pressure)
7.1.3.16 Hot water (ml)
The amount of Hot water Unit: ml Setting range: Please refer to the screen value input interface. Different drinks have different tolerance.
7.1.3.17 Milk（s）
The time of milk output Unit: s Setting range: Please refer to the screen value input interface. Different drinks have different tolerance.
7.1.3.18 Milk Foam（s）
The time of milk foam output Unit: s Setting range: Please refer to the screen value input interface. Different drinks have different tolerance.
7.1.3.19 Waiting（s）
The time between step to step Unit：S. Setting range: Refer to the prompt on the screen value input interface.
7.1.3.20 Extraction Control
Set the extraction control for making drinks. Setting Range: standard; strong; extra strong
7.1.3.21 Temperature Range
The temperature for making drinks adjustable:High;Medium;Low