Dr.coffee M12 - Parameters Import & Export; Drinks Param; Maintenance Param; Machine Param

Rev 0.1
Dr.coffee Service Manual 41
7.4.6 Parameters Import & Export
U-Disk for machine setting should follow the requirements below:
❖ Requirements for U-Disk:
➢ Memory Capacity: No more than 32GB
➢ Port: USB 1.0 or USB 2.0;(USB 3.0 is not available temporarily )
➢ Format : FAT or FAT32;
7.4.6.1 Drinks Param.
Connect to U-Disk and follow the tips in the interface to import or export the parameters.
Export steps: Connect to U-Disk, tap” ”, parameters export accomplished.
Import steps: Connect to U-Disk, tap” ”, parameters import accomplished.
7.4.6.2 Maintenance Param.
Connect to U-Disk and follow the tips in the interface to import or export the parameters.
Export steps: Connect to U-Disk, tap” ”, parameters export accomplished.
Import steps: Connect to U-Disk, tap” ”, parameters import accomplished.
7.4.6.3 Machine Param.
Connect to U-Disk and follow the tips in the interface to import or export the parameters.
Export steps: Connect to U-Disk, tap” ”, parameters export accomplished.
Import steps: Connect to U-Disk, tap” ”, parameters import accomplished.
7.4.6.4 Engineer Param.
Connect to U-Disk and follow the tips in the interface to import or export the parameters.
Export steps: Connect to U-Disk, tap” ”, parameters export accomplished.
Import steps: Connect to U-Disk, tap” ”, parameters import accomplished.