DSC WP8030 Installer's Guide

3. WP8010 INSTALLATION
D-306233 CUSDOC PM-10/30 V18 DSC TRIPLE EN INST 39
5.4.8 Updating Devices after Exiting Installer Mode
When exiting the "Installer mode", the WP8010/WP8030 panel communicates with all devices in the system and
updates them with the changes that have been performed in their "Device Settings" configuration. During the updating
period, the display indicates "DEV UPDATING 018" where the number (for example, 018) is a countdown of the
remaining number of devices yet to be updated.
5.5 Control Panel
5.5.1 General Guidance – "Control Panel" Flow-Chart & Menu Options
The "CONTROL PANEL" menu enables you to configure and customize the operation of the control panel. The
"CONTROL PANEL" menu provides you with configurable parameters divided into several groups, each dealing with
certain aspects of the system operations as follows (see detailed list in Step 2 of the chart below):
Group
Description of Group Features and Parameters
Section
Arming/Disarming
and Exit/Entry
Procedures
Contains configurable features and parameters related to Arming and Disarming of the
system and the Exit and Entry procedures.
5.5.2
Zone Behavior
Contains configurable features and parameters related to the functionality of the Zones.
5.5.3
Alarms &
Troubles
Contains configurable features and parameters related to initiating, canceling and
reporting of Alarm and Trouble events.
5.5.4
Sirens
Contains configurable features and parameters common to all sirens in the system.
5.5.5
User Interface
Contains configurable features and parameters related to the functionality of the panel's
audible and visual indications.
5.5.6
Jamming &
Supervision
Contains configurable features and parameters related to detecting and reporting of RF
Jamming and device Supervision (missing device) events.
5.5.7
Miscellaneous
Contains a variety of other configurable features and parameters related to the system.
5.5.8

DSC WP8030 Specifications

General

Brand	DSC
Model	WP8030
Category	Control Panel
Language	English