DSC WP8030 Installer's Guide

3. WP8010 INSTALLATION
48 D-306233 CUSDOC PM-10/30 V18 DSC TRIPLE EN INST
5.6 Communication
5.6.1 General Guidance – "Communication" Flow-Chart & Menu Options
The COMMUNICATION menu enables you to configure and customize the communication and reporting of alarm,
troubles and other system events for monitoring companies or private users according to your local requirements and
personal preferences. WP8010/WP8030 offers a variety of communication means including telephone PSTN landline,
Cellular GSM, GPRS, EMAIL, MMS or SMS and IP via broadband internet connection.
Notes:
1. GPRS cannot be enabled in UL Listed product.
2. SMS is a supplementary feature.
The "04.COMMUNICATION" menu contains several sub-menu options, each covering a group of configurable features
and parameters related to the communication and reporting as follows (see detailed list in Step 3 of the chart below):
Option
Description of Option Features and Parameters
Section
1:PSTN TEL LINE
Contains configurable features and parameters related to the PSTN telephone line
to which the WP8010/WP8030 is connected.
5.6.2
2:GSM/GPRS/SMS
Contains configurable features and parameters related to the Cellular connection
of the WP8010/WP8030 system.
5.6.3
3:C.S. REPORTING
Contains configurable features and parameters related to Reporting of event
messages to Monitoring Stations via telephone, cellular or IP broadband
communication.
5.6.4
4:PRIVATE REPORT
Contains configurable features and parameters related to Reporting event
messages to Private Users via email, telephone, MMS or SMS.
5.6.5
5:MOTION CAMERA
Contains configurable features and parameters related to Motion Cameras for
Video Alarm Verification and forwarding of image clips to the Monitoring Station
and other remote subscribers via e-mail and/or MMS network.
5.6.6
6:UP/DOWNLOAD
Contains configurable connection information, access permission and security
codes related to the Upload/Download procedures via PSTN or GPRS.
5.6.7
7:BROADBAND
1, 2
Contains DHCP Client settings, enables to enter LAN parameters and reset
broadband module/settings.
5.6.8
To enter the "04.COMMUNICATION" menu and to select and configure an option, proceed as follows:
Step 1
Step 2
Step 3
Step 4
Select "COMMUNICATION"
Select Communication
Sub-menu option
Select the "Communication" Parameter you wish to configure




See
INSTALLER MODE

04.COMMUNICATION
1:PSTN TEL LINE
AREA CODE SKIP
5.6.2

LINE PREFIX
DIAL METHOD
2:GSM/GPRS/SMS
GPRS REPORT
GPRS PASSWORD
5.6.3

GSM REPORT
NETWORK ROAMING
SMS REPORT
GPRS ALWAYS ON
GPRS APN
GSM KEEP ALIVE
GPRS USERNAME
TRANS. PROTOCOL
SIM PIN CODE
3:C.S. REPORTING
01:REPORT EVENTS 
46:PSTN RETRIES
5.6.4

02:1st RPRT CHAN
47:GSM RETRIES
() These options
are available only to
the "Master Installer"
03:2nd RPRT CHAN
48:BB IP RETRIES
3
04:3rd RPRT CHAN
51:TEL AUTO TEST
05:DUAL REPORT
52:AUTO-TST TIME
11:RCVR1 ACCOUNT 
53:COM.FAIL RPRT
12:RCVR2 ACCOUNT 
PSTN FAIL
16:PSTN/GSM RCV1 
GSM/GPRS FAIL
17:PSTN/GSM RCV2 
61:RPRT CNF ALRM
1
Broadband is not applicable for UL installations
2
The name of the product is PowerLink3 IP Communicator
3
BB IP Retries is not relevant for UL installations

DSC WP8030 Specifications

General

Brand	DSC
Model	WP8030
Category	Control Panel
Language	English