DSC WP8030 Installer's Guide

3. WP8010 INSTALLATION
84 D-306233 CUSDOC PM-10/30 V18 DSC TRIPLE EN INST
A4. Communication
1
WP8010
WP8030
Communication
PSTN; GSM; GPRS; IP (for future use)
PSTN; GSM; GPRS; IP (for future use)
Built-in Modem
300 baud, Bell 103 protocol
300 baud, Bell 103 protocol
Data Transfer to
Local Computer
Via RS232 serial port
Via RS232 serial port
Report
Destinations
2 Monitoring Stations, 4 private telephones
2 Monitoring Stations, 4 private telephones
Reporting Format
Options
SIA, Contact ID, Scancom, SIA IP, DSC
PowerNet.
Note: For UL Listed product, the
communication formats used are SIA and
Contact ID.
SIA, Contact ID, Scancom, SIA IP, DSC
PowerNet.
Note: For UL Listed product, the
communication formats used are SIA and
Contact ID.
Pulse Rate
10, 20, 33 and 40 pps - programmable
10, 20, 33 and 40 pps - programmable
Message to Private
Phones
Tone
Tone or voice
Ring Detection
The unit does not support ring detection
without DC voltage present on the telephone
lines.
The unit does not support ring detection
without DC voltage present on the telephone
lines
A5. Physical Properties
WP8010
WP8030
Operating Temp.
Range
14°F to 120°F (-10°C to 49°C)
Note: For UL Listed product, the ambient
temperature is 32°F to 120°F (0°C to 49°C)
14°F to 120°F (-10°C to 49°C)
Note: For UL Listed product, the ambient
temperature is 32°F to 120°F (0°C to 49°C)
Storage Temp.
Range
-4°F to 140°F (-20°C to 60°C)
-4°F to 140°F (-20°C to 60°C)
Humidity
93% relative humidity, @ 30°C (86°F)
93% relative humidity, @ 30°C (86°F)
Size
196 x 180 x 55 mm (7-5/8 x 7 x 2 in.)
266 x 201 x 63 mm (10-7/16 x 7-7/8 x 2-1/2 in.)
Weight
658g (23 Oz) (with battery)
1.44Kg (3.2 pounds) (with battery)
Color
White
White
A6. Peripherals and Accessory Devices
WP8010
WP8030
Modules
GSM/GPRS, IP (future use)
GSM/GPRS, IP (future use)
Additional
wireless devices
30 detectors, 8 keyfobs, 8 keypads, 4 sirens,
4 repeaters, 8 proximity tags
64 detectors, 32 keyfobs, 32 keypads, 8
sirens, 4 repeaters , 32 proximity tags
Wireless Devices
and peripherals
Magnetic Contact: PGx945, PGx975
PIR Detectors : PGx904; PGx904P, PGx994,
PGx984, PGx984P, PGx974, PGx974P,
PGx924, PGx944
PIR Camera Detectors: PGx934; PGx934P
Smoke Detector: PGx926/ PGx916
(optional)
GSM Module: WPGSM
Keyfob: PGx939, PGx929Keypad: WP-LED
(with tag), WP-Touch Indoor Siren:
PGx901/PG9901
Outdoor Sirens: PGx911, PG9911Repeater:
PGx920
Gas: PGx913 (CO detektor)
Glass-break: PGx912
Temperature: PGx905
Shock: PGx935
Note: UL requires that when using remote
smoke/CO detectors and repeaters, each
detector must be within range (STRONG) of 2
Magnetic Contact: PGx945, PGx975
PIR Detectors : PGx904; PGx904P, PGx994,
PGx984, PGx984P, PGx974, PGx974P,
PGx924, PGx944
PIR Camera Detectors: PGx934; PGx934P
Smoke Detector: PGx926/ PGx916
(optional)GSM Module: WPGSM
Keyfob: PGx939, PGx929Keypad: WP-LED
(with tag), WP-Touch Indoor Siren:
PGx901/PG9901
Outdoor Sirens: PGx911, PG9911
Repeater: PGx920
Gas: PGx913 (CO detector)
Glass-break: PGx912
Temperature: PGx905
Shock: PGx935
Note: UL requires that when using remote
smoke/CO detectors and repeaters, each
detector must be within range (STRONG) of 2
repeaters at all times (for path redundancy –
1
For EN/European compliance setting: Dual reporting PowerLink3 and PSTN (for both WP8010and WP8030) or PowerLink3 and GSM
only for WP8030.

DSC WP8030 Specifications

General

Brand	DSC
Model	WP8030
Category	Control Panel
Language	English