DSC WP8030 Installer's Guide

3. WP8010 INSTALLATION
D-306233 CUSDOC PM-10/30 V18 DSC TRIPLE EN INST 93
APPENDIX F. PowerLink3 IP Communicator
1
,
2
IMPORTANT NOTICE
DSC is a manufacturer and supplier of equipment. DSC DOES NOT provide PowerManage services including
event notification or other forwarding services.
In order to benefit fully from the PowerLink3 IP Communicator, it must be connected to a central monitoring
station or other service provider running DSC's PowerManage.
The PowerLink3 IP Communicator is compatible with the WP8010/WP8030 control panel version 17 and above.
F1. Getting Started
The DSC PowerLink3 IP Communicator provides a communication channel to the PowerManage server and enables you
to send events, including alarm images of PIR cameras, and to manage panel configuration. (For detailed information,
refer to the PowerManage User’s Guide.)
Note: PowerLink3 IP Communicator does not include viewing by cameras or control of options via a web interface.
F2. Specifications
SOFTWARE
Security System
 WP8010/WP8030r events reporting to PowerManage servers
 Providing communication channel to PowerManage servers
Management
 IP Address: Auto configuration or Manual Configuration
 Reset to Factory Defaults Option
 Remote Firmware Upgrade
Data Security
 AES 128 Bit encryption for SIA-IP WP8010/WP8030 events
HARDWARE
WP8010/WP8030 Connection
 RS-232
Size
 73 x 61.5 x 16mm (2-7/8 x 2-7/16 x 5/8 in.)
Weight
 50g (1.8 oz.)
Color
 Silver
Operating Temperature
 -10ºC to 55ºC (14ºF to 131ºF)
Storage Temperature
 -20ºC to 60ºC (-4ºF to 140ºF)
1
PowerLink3 IP Communicator is not applicable for UL installations
2
In the menus, PowerLink3 IP Communicator appears as “Broadband” or “Broadband Module”.

DSC WP8030 Specifications

General

Brand	DSC
Model	WP8030
Category	Control Panel
Language	English