3. WP8010 INSTALLATION
60 D-306233 CUSDOC PM-10/30 V18 DSC TRIPLE EN INST
5.7.4 PGM-5 Connection
05:OUTPUS
EXTERNAL PGM PGM-5 OPTIONS …
If a PGM-5 module has been connected, proceed to enable the operation of the module as follows:
Select “EXTERNAL
PGM” menu
Panel displays currently
selected setting
Select whether to enable
or disable the PGM-5
5.7.5 Entering Daytime Limits
05:OUTPUS
PGM OUTPUTS
LOCKOUT TIME …
Enter the "LOCKOUT TIME" menu and enter the daytime limits through which the PGM device will turn off, even when
the associated sensors are triggered.
Select “LOCKOUT
TIME” menu
Enter the time at which
you wish the lockout state
to begin
Enter the time at which
you wish the lockout
state to end
Press
to return
to “LOCKOUT TIME” or
to take you to
“<OK> TO EXIT”