44 | 14.1 Installing Printer Driver
DuraLabel.com | 800.788.5572
PRINTING FROM A COMPUTER
10. Enter Printer Name and set it as the default
printer, if you choose, by checking the
adjoining box in the Specify Printer Name
window that opens. Choose a sharing option,
then click Next.
11. Review information on the Completing the
Seagull Driver Wizard window that appears.
Click Finish if the information is correct. If
it isn’t, correct previous selections and click
Finish when the information is correct.
12. A Driver Wizard Completed Successfully
window appears, confirming the printer driver
installation was completed successfully. Now
click Close.
13. The previous window closes and a Completing
the DuraLabel Driver Setup Wizard window
appears. Click Finish to complete the new
driver installation.
10. Specic Printer Name, Default and
Sharing Status
11. Completing the Seagull Driver Wizard
12. Driver Wizard Completed Successfully
13. Click Finish on the Completing the
DuraLabel Driver Setup Wizard window.
The driver installation is now complete.
To Next Page
Loading...
