To Next Page

Instruction manualInstruction manual

Operating & MaintenanceOperating & Maintenance

4812158801_E.pdf4812158801_E.pdf

Vibratory rollerVibratory roller

CC722/7200CC722/7200

EngineEngine

Cummins QSB 6.7 C (IIIB/T4i)Cummins QSB 6.7 C (IIIB/T4i)

Serial numberSerial number

10000326xxA007761 -10000326xxA007761 -

10000361xxA014104 -10000361xxA014104 -

Translation of original instructionTranslation of original instruction

Reservation for changesReservation for changes

Printed in SwedenPrinted in Sweden

Table of Contents3
Introduction9
The Machine9
Intended Use9
Warning Symbols9
Safety Information9
General10
CE Marking and Declaration of Conformity11
Safety - General Instructions13
Safety - When Operating15
Work Driving15
Driving Near Edges16
Safety (Optional)17
Air Conditioning (Optional)17
Special Instructions19
Standard Lubricants and Other Recommended Oils and Fluids19
Higher Ambient Temperatures, above +40°C (104°F)19
Lower Ambient Temperature - Freeze Risk19
Temperatures19
High Pressure Cleaning19
Fire Fighting20
Roll over Protective Structure (ROPS), ROPS Approved Cab20
Battery Handling20
Jump Starting21
Technical Specifications23
Vibrations - Operator Station23
Noise Level23
Slopes23
Dimensions, Side View24
Dimensions, Top View25
Weights and Volumes26
- Working Capacity26
- General27
- Hydraulic System27
- ROPS - Bolts27
- Tightening Torque28
Machine Description29
- Identification29
- Decals31
  - Safety Decals32
  - Info Decals33
- Instruments/Controls34
Operation47
- Before Starting47
- Starting52
  - Starting the Engine52
- Driving53
  - Operating the Roller53
  - Interlock/Emergency Stop/Parking Brake - Check54
- Vibration55
- Braking56
  - Reserve Brake56
  - Switching off57
- Parking57
  - Chocking the Drums57
  - Master Switch58
Long-Term Parking59
- Engine59
- Battery59
- Air Cleaner, Exhaust Pipe59
- Sprinkler System59
- Fuel Tank59
- Hydraulic Reservoir60
- Steering Cylinder, Hinges, Etc60
- Hoods, Tarpaulin60
Miscellaneous61
- Lifting61
- Towing/Recovering62
Operating Instructions - Summary65
Preventive Maintenance67
- Acceptance and Delivery Inspection67
- Warranty67
Maintenance - Lubricants and Symbols69
- Maintenance Symbols70
Maintenance - Maintenance Schedule71
- Service and Maintenance Points71
- General72
- Every 10 Hours of Operation (Daily)72
- After the FIRST 50 Hours of Operation73
- Every 50 Hours of Operation (Weekly)73
- Every 250 / 750 / 1250 / 1750 Hours of Operation73
- Every 500 / 1500 Hours of Operation74
- Every 1000 Hours of Operation74
- Every 2000 Hours of Operation75
Maintenance, 10H77
- Diesel Engine Check Oil Level77
- Coolant Level - Check78
Water Separator - Drainage78
Brakes - Check79
Sprinkler System - Check, Cleaning79
Nozzle - Dismantling/Cleaning80
Scrapers - Check, Adjustment80
Hydraulic Reservoir, Level Check - Filling81
Water Tanks - Filling81
Fuel Tank - Filling82
Maintenance - 50H83
Air Cleaner83
Checking - Change the Main Air Filter83
Backup Filter - Change84
Air Cleaner - Cleaning84
Rubber Elements and Fastening Screws - Check85
Articulation and Steering Cylinder - Lubrication85
Hydraulic Reservoir - Check/Venting86
Battery86
Checking the Electrolyte Level86
Battery Cell87
Maintenance Measures - 250 H89
Pump Drive - Oil Level, Check - Filling89
Drum Drive - Checking the Oil Level90
Maintenance Measures - 500 H91
Drum - Checking the Oil Level91
Controls and Moving Joints - Lubrication92
Maintenance - 1000H93
Hydraulic Fluid Filter - Replacement93
Air Filter - Change94
Backup Filter - Change94
Fuel Tank - Drainage95
Hydraulic Fluid Reservoir - Draining96
Maintenance - 2000H97
Hydraulic Reservoir - Replacing the Fluid/Filters97
Drum - Changing the Oil98
Drum Drive - Changing the Oil99
Pump Drive - Changing the Oil100

Brand	Dynapac
Model	CC722
Category	Construction Equipment
Language	English

Dynapac CC722 User Manual

Table of Contents

Questions and Answers:

Dynapac CC722 Specifications

Related product manuals