Eaton EASY-E4 Series User Manual

0.1 About this manual
0.1.5 Writing conventions
Award Description
Monospaced
Font
Used for displays, elements at the file level, source code command lines
Button Used for the button labels on the device and in easySoft 7
Menu path\submenu\...\item Used for paths to views and dialog boxes in easySoft 7
Menu/command Used for commands found in the menu
<name>
Angle brackets are used to indicate variable values
that you must replace with your own values
13:08
Flashing values on the display are shown in gray in this manual
Table 1: Format conventions used throughout this manual
0.1.5.1 Warning labels
Danger! Risk of personal injury.
DANGER
Warns of hazardous situations that result in serious injury or death.
WARNING
Warns of the possibility of hazardous situations that could result in ser-
ious injury or even death.
DANGER!
Dangerous Electrical Voltage!
CAUTION
Warns of the possibility of hazardous situations that can cause injury.
Property damage warning
NOTICE
Warns about the possibility of material damage.
Prohibited use
Prohibited uses, actions, etc.
Explanation
16
easyE4 11/18 MN050009 EN www.eaton.com

Eaton EASY-E4 Series Specifications

General

Type	Programmable Relay
Digital Inputs	Up to 12
Digital Outputs	Up to 8
Display	LCD
Operating Temperature	-25°C to +55°C
Protection Degree	IP20
Storage Temperature	-40°C to +70°C
Supply Voltage	24 V DC, 100-240 V AC
Analog Inputs	4
Outputs	Relay, transistor
Programming	EASY-SOFT-PRO
Communication	Ethernet, Modbus, CANopen
Expansion	Expandable with additional modules
Relative Humidity	5% to 95% (non-condensing)
Standards	IEC/EN 61131-2, UL 508, CSA C22.2 No. 142