Eaton EASY-E4 Series User Manual

4. Operation
4.4 Overview of the menus on the device
4.4 Overview of the menus on the device
Following is an overview of the menu structure and the various submenus that can be
accessed from the main menu.
4.4.1 Main menu
Ongoing operation To work on the easyE4
STOP RUN ✓
PARAMETERS
SETCLOCK
CARD
INFORMATION
SYSTEM-OPT.
PROGRAM
Table 8: Main menu
STOP ✓ RUN
PARAMETERS
SETCLOCK
CARD
INFORMATION
SYSTEM-OPT.
PROGRAM
Table 9: Main menu
4.4.2 STOP RUN operating mode menu
This submenu can be used to switch between operating modes.
STOP✓ RUN
STOP RUN ✓
STOP?
YES
NO
Table 10: STOP
RUN?
YES
NO
Table 11: RUN
See also
→ Section "Operating modes of the easyE4", page 91
easyE4 11/18 MN050009 EN www.eaton.com
95

Eaton EASY-E4 Series Specifications

General

Type	Programmable Relay
Digital Inputs	Up to 12
Digital Outputs	Up to 8
Display	LCD
Operating Temperature	-25°C to +55°C
Protection Degree	IP20
Storage Temperature	-40°C to +70°C
Supply Voltage	24 V DC, 100-240 V AC
Analog Inputs	4
Outputs	Relay, transistor
Programming	EASY-SOFT-PRO
Communication	Ethernet, Modbus, CANopen
Expansion	Expandable with additional modules
Relative Humidity	5% to 95% (non-condensing)
Standards	IEC/EN 61131-2, UL 508, CSA C22.2 No. 142