7. System settings
7.1 System options - Base device with display and buttons
7.1 System options - Base device with display and buttons
The system options that can be configured on EASY-E4-...-12...C1 base devices include:
SECURITY
SYSTEM
MENU LANGUAGE
DELETE PROGRAM
NET
ETHERNET
Table 64: System options
Security
Access to the area used to assign a password and define password-protected
areas
→ Section "Security – password protection", page 476
System
DEBOUNCE
P BUTTONS ✓
RUN MODE
CARD MODE
LOAD CARD
DISPLAY
DEVICE ID
BOOT LOGO
Table 65: System option-
s\System
Accessing the system settings:
Debounce, → Section "Debounce", page 469
P Buttons, → Section "P buttons", page 471
RUN Start, Card Start, → Section "Setting the startup behavior", page 466
Load Card, → Section "Configuring the memory card and device ID", page 481
Display, Display settings, → Section "View", page 461
Device ID, Device IDs, → Section "Device ID", page 461
Splash Screen, Used to set the display duration on the display, provided that a
boot.bmp file has been stored on the memory card. → Section "Boot logo", page
462
Menu language
Used to set the device menu language, → Section "Switch languages", page 465
DELETE PROGRAM
Deletes the program on the easyE4 from the device memory
NET
Used to configure a NET GROUP as a group of multiple devices, → Section
"Setting up a NET", page 537
The submenu is only provided in English
ETHERNET
Used to configure the Ethernet settings on the device,
→ Section "Ethernet", page 464
The submenu is only provided in English
460
easyE4 11/18 MN050009 EN www.eaton.com
To Next Page
Loading...
Need help?
General
