Eaton EASY-E4 Series User Manual

4. Operation
4.3 Operation of the menu selection and value entry
4.3.3 Selecting a device menu
You can use the main menu from the status display in order to access the individual sub-
menus.
Press the OK button.
The main menu will appear.
The scrollbar on the right side will indicate whether there are additional menu options.
Please note that since the display has six lines only, you may need to use the
cursor buttons to scroll to the remaining available lines on a screen
STOP ✓ RUN
PARAMETERS
SETCLOCK
CARD
INFORMATION
SYSTEM-OPT.
PROGRAM
Table 7: Main menu
94
easyE4 11/18 MN050009 EN www.eaton.com

Eaton EASY-E4 Series Specifications

General

Type	Programmable Relay
Digital Inputs	Up to 12
Digital Outputs	Up to 8
Display	LCD
Operating Temperature	-25°C to +55°C
Protection Degree	IP20
Storage Temperature	-40°C to +70°C
Supply Voltage	24 V DC, 100-240 V AC
Analog Inputs	4
Outputs	Relay, transistor
Programming	EASY-SOFT-PRO
Communication	Ethernet, Modbus, CANopen
Expansion	Expandable with additional modules
Relative Humidity	5% to 95% (non-condensing)
Standards	IEC/EN 61131-2, UL 508, CSA C22.2 No. 142