Eaton EASY-E4 Series User Manual

9. easyE4 inside
9.5 Device information
9.5 Device information
Device information is provided in the
Information menu both for service purposes and in order to make it possible to identify
the device's performance characteristics.
Following data is displayed:
The submenu is only available in English.
ACTUAL CONFIG - Shows the device configuration
l NET GROUP: The NET group number, on a single line, e.g., 00
l NET-ID: The device's station number, on a single line, e.g., 00
l MAC ADDRESS: (MAC address of the device), two display lines
e.g. 0022C712343E
l DEVICE NAME: E.g.: EASYE4-12UC1 DNS device name
l IP-ADDRESS: xxx.xxx.xxx.xxx
l SUBNET MASK: xxx.xxx.xxx.xxx
l GATEWAY ADDRESS: xxx.xxx.xxx.xxx
l DNS SERVER: xxx.xxx.xxx.xxx
l WEB SERVER (Enabled / Disabled)
l
HTTP PORT
l MODBUS TCP (Enabled / Disabled)
SYSTEM - Shows the operating system version
l E4- : Part number
l B : 0068(build version)
l OS : 1.00(Version)
l CRC : 60268(checksum)
easyE4 11/18 MN050009 EN www.eaton.com
511

Eaton EASY-E4 Series Specifications

General

Type	Programmable Relay
Digital Inputs	Up to 12
Digital Outputs	Up to 8
Display	LCD
Operating Temperature	-25°C to +55°C
Protection Degree	IP20
Storage Temperature	-40°C to +70°C
Supply Voltage	24 V DC, 100-240 V AC
Analog Inputs	4
Outputs	Relay, transistor
Programming	EASY-SOFT-PRO
Communication	Ethernet, Modbus, CANopen
Expansion	Expandable with additional modules
Relative Humidity	5% to 95% (non-condensing)
Standards	IEC/EN 61131-2, UL 508, CSA C22.2 No. 142