Eaton EASY-E4 Series User Manual

3. Commissioning
3.3 Switch on
3.3.6 Remote operation
If you want to put the easyE4 device into operation without being present at the
machine or system, make sure that you always know what exactly will happen when
you do so.
Make absolutely sure that remote operation will not endanger anyone.
See also
→ Section "Setting up a web server", page 560
→ Section "Modbus TCP", page 545
→ Section "Setting up a NET", page 537
84
easyE4 11/18 MN050009 EN www.eaton.com

Eaton EASY-E4 Series Specifications

General

Type	Programmable Relay
Digital Inputs	Up to 12
Digital Outputs	Up to 8
Display	LCD
Operating Temperature	-25°C to +55°C
Protection Degree	IP20
Storage Temperature	-40°C to +70°C
Supply Voltage	24 V DC, 100-240 V AC
Analog Inputs	4
Outputs	Relay, transistor
Programming	EASY-SOFT-PRO
Communication	Ethernet, Modbus, CANopen
Expansion	Expandable with additional modules
Relative Humidity	5% to 95% (non-condensing)
Standards	IEC/EN 61131-2, UL 508, CSA C22.2 No. 142