Eaton EASY-E4 Series User Manual

3. Commissioning
3.4 Overview of switch-on behavior
3.4 Overview of switch-on behavior
The following figure shows what happens when the device is turned on.
l RUN start
l Card start
As soon as the easyE4 device starts, the options will be read.
The easyE4 basic device will check whether a microSD has been inserted and whether
there is a starting program on the microSD. The device will then switch to RUN or STOP
mode depending on these parameters.
easyE4 11/18 MN050009 EN www.eaton.com
85

Eaton EASY-E4 Series Specifications

General

Type	Programmable Relay
Digital Inputs	Up to 12
Digital Outputs	Up to 8
Display	LCD
Operating Temperature	-25°C to +55°C
Protection Degree	IP20
Storage Temperature	-40°C to +70°C
Supply Voltage	24 V DC, 100-240 V AC
Analog Inputs	4
Outputs	Relay, transistor
Programming	EASY-SOFT-PRO
Communication	Ethernet, Modbus, CANopen
Expansion	Expandable with additional modules
Relative Humidity	5% to 95% (non-condensing)
Standards	IEC/EN 61131-2, UL 508, CSA C22.2 No. 142