Eaton EASY-E4 Series User Manual

6. Function blocks
6.1 Manufacturer function blocks
>I2 Outputs the value of DB..I1 when triggered.
Integer value range:
-2,147,483,648 to +2,147,483,647
See also
→ Section "BC - Block compare", page 306
→ Section "BT - Block transfer", page 311
→ Section "MX - Data multiplexer", page 322
→ Section "SR - Shift register", page 326
→ Section "TB - Table function", page 334
→ Section "Retention function", page 473
→ Section "Organizing marker ranges", page 163
easyE4 11/18 MN050009 EN www.eaton.com
321

Eaton EASY-E4 Series Specifications

General

Type	Programmable Relay
Digital Inputs	Up to 12
Digital Outputs	Up to 8
Display	LCD
Operating Temperature	-25°C to +55°C
Protection Degree	IP20
Storage Temperature	-40°C to +70°C
Supply Voltage	24 V DC, 100-240 V AC
Analog Inputs	4
Outputs	Relay, transistor
Programming	EASY-SOFT-PRO
Communication	Ethernet, Modbus, CANopen
Expansion	Expandable with additional modules
Relative Humidity	5% to 95% (non-condensing)
Standards	IEC/EN 61131-2, UL 508, CSA C22.2 No. 142