Eaton EASY-E4 Series User Manual

6. Function blocks
6.2 Interrupt function blocks
Operating mode: On-delayed
Figure 200: easySoft 7 main program
Figure 201: easySoft 7 interrupt program
See also
→ Section "IT - Time-controlled interrupt function block", page 424
→ Section "IE - Edge-controlled interrupt function block", page 418
easyE4 11/18 MN050009 EN www.eaton.com
431

Eaton EASY-E4 Series Specifications

General

Type	Programmable Relay
Digital Inputs	Up to 12
Digital Outputs	Up to 8
Display	LCD
Operating Temperature	-25°C to +55°C
Protection Degree	IP20
Storage Temperature	-40°C to +70°C
Supply Voltage	24 V DC, 100-240 V AC
Analog Inputs	4
Outputs	Relay, transistor
Programming	EASY-SOFT-PRO
Communication	Ethernet, Modbus, CANopen
Expansion	Expandable with additional modules
Relative Humidity	5% to 95% (non-condensing)
Standards	IEC/EN 61131-2, UL 508, CSA C22.2 No. 142