Eaton EASY-E4 Series User Manual

13. Maintenance
13.3 Storage, transport and disposal
The easyE4 is sturdily built, but the components inside it are sensitive to excessively
strong vibrations and/or mechanical shock.
Accordingly, make sure to protect the easyE4 from mechanical loads that exceed the
scope of the unit's intended use.
The device should only be transported in its original packaging after being packed prop-
erly.
13.3.2 Disposal
EXPLOSION HAZARD
LITHIUM BATTERY
The lithium battery inside the easyE4 may explode if handled incor-
rectly.
Dispose of the unit professionally.
Important!
Dispose of recyclables as required by your local recycling regulations.
easyE4 no longer being used must be professionally disposed of as per local standards
or returned to the manufacturer or relevant sales department.
Materials used in the packaging
Packaging Material
Outer packaging Cardboard
Inner packaging Cardboard
Plastic bag: polyethylene (PE)
easyE4 11/18 MN050009 EN www.eaton.com
577

Eaton EASY-E4 Series Specifications

General

Type	Programmable Relay
Digital Inputs	Up to 12
Digital Outputs	Up to 8
Display	LCD
Operating Temperature	-25°C to +55°C
Protection Degree	IP20
Storage Temperature	-40°C to +70°C
Supply Voltage	24 V DC, 100-240 V AC
Analog Inputs	4
Outputs	Relay, transistor
Programming	EASY-SOFT-PRO
Communication	Ethernet, Modbus, CANopen
Expansion	Expandable with additional modules
Relative Humidity	5% to 95% (non-condensing)
Standards	IEC/EN 61131-2, UL 508, CSA C22.2 No. 142