Eaton EASY-E4 Series User Manual

Appendix
A.4 Further reading
A.4 Further reading
Hardware
For more information on additional devices and modules, please refer to the following
documentation:
Installation instructions Base devices
IL050020ZU
Installation leaflet for I/O expansions
IL050021ZU
Installation instructions Fixing bracket
IL05009005Z
Download Center,Eaton Online Catalog
Enter "easy" into the search box and the catalog will take you directly to the cor-
responding product group in the Automation, Control and visualization section.
http://www.eaton.eu/doc
http://www.eaton.eu/ecat
Product information
For up-to-date information, please consult the product page on the Internet.
http://www.eaton.eu/easy
Application examples
A number of applications are available for download from the product page at
http://www.eaton.eu/easy.
These examples come with a description, the circuit diagram, and the easySoft 7 pro-
ject (in the EDP and LD programming languages as of this writing).
Tutorials
For helpful videos that explain how to use specific functions, please visit the product
page at http://www.eaton.eu/easy.
Product training
The Eaton Experience Center Training (EEC) has a series of training courses available
for the easyE4. For more information, as well as to download the workshop catalog,
please visit:
http://www.eaton.eu/training
Community
easyForum is an additional source of help that can be found on the Internet at:
http://www.easy-forum.net
easyE4 11/18 MN050009 EN www.eaton.com
587

Eaton EASY-E4 Series Specifications

General

Type	Programmable Relay
Digital Inputs	Up to 12
Digital Outputs	Up to 8
Display	LCD
Operating Temperature	-25°C to +55°C
Protection Degree	IP20
Storage Temperature	-40°C to +70°C
Supply Voltage	24 V DC, 100-240 V AC
Analog Inputs	4
Outputs	Relay, transistor
Programming	EASY-SOFT-PRO
Communication	Ethernet, Modbus, CANopen
Expansion	Expandable with additional modules
Relative Humidity	5% to 95% (non-condensing)
Standards	IEC/EN 61131-2, UL 508, CSA C22.2 No. 142