Eaton easyE4

4. Operation
4.5 Your first EDP program
Circuit diagram display
The content of the circuit diagram is displayed in the first 5 lines. This window can be
moved over the circuit diagram. At the moment the circuit diagram is empty.
The cursor flashes at the top left, which is where you will start to wire your circuit
diagram.
Circuit diagram display
Fig. 80: Empty circuit diagram
The last line shows the cursor's position:
l
L: = Rung (Line).
l
C: = Contact or coil field (Column).
l
Amount of free memory in bytes.
easyE402/24 MN050009ENEaton.com
171