2. Installation
2.6 Programming software license
2.6 Programming software license
The programming software (version 7 and higher) is available for download.
Please note that easyE4 devices can only be programmed with versions of
easySoft 7 or higher.
The programming software easySoft is available for free.
However, you will need to buy a software license in order to be able to use all of the
software's functions.
You can order an easySoft 8 programming software license through your
supplier or through the EATONonline catalog
EASYSOFT-SWLIC, catalog no. 197226.
Once you purchase a software license, you will receive a license product certificate
that you can then use to request a license key online. This license key can be used to
unlock all of the software's functions. This license key is also valid for all higher ver-
sions of easySoft.
Installation requirements
l
An easySoft 7 version or higher
l
A PC that meets all system requirements and for which the person installing the
software has administrator privileges
l
A 24-digit license key
If a valid key is not entered during installation,
the software will be installed in demo mode.
This means that the software will be fully installed, but with the fol-
lowing
limitations:
l
You will not be able to load any programs onto a connected device
(no online function)
l
There will not be any card manager functions available for the
microSD memory card
However, you will still be able to simulate programs.
You can always add a license key later on.
easyE402/24 MN050009ENEaton.com
93
To Next Page
Loading...
Need help?
General