Eaton easyE4

4. Operation
4.3 Operation of the menu selection and value entry
4.3 Operation of the menu selection and value entry
4.3.1 How to navigate the device menus
OK
Select; confirm value
ESC
Cancel; go back
DEL
Delete
ALT
Depending on the starting point:
- Toggle display
- Jump to the start or end of the menu
- Jump to next line
Go left
Go right
Go up; increment value
Go down; decrement value
4.3.2 Operating principle in the circuit diagram and function block editor
Button Effect
DEL
Delete rung, contact, relay or empty rung in the circuit diagram
ALT
Toggle between N/C and N/O contact, connect contacts, relays and rungs,
add rungs
Change value; move cursor up, down
Change position; move cursor left, right
ESC
Undo setting from last OK, current display, leave menu
OK
Change contact / relay. Insert new; save settings
P1 input when used as P button
P2 input when used as P button
P3 input when used as P button
P4 input when used as P button
easyE402/24 MN050009ENEaton.com
159