1. Description of easyE4 control relay
1.6 Nameplate
1.6 Nameplate
The device can be identified by checking the nameplate on its side.
This nameplate includes the following information:
l
Manufacturer
l
Generation (hardware revision)
l
Operational voltage
l
Heat dissipation information
l
Type approval and certification marks and information
l
Information relevant to UL listing
In addition to the device's part number and MAC address, the QR code in the front
also contains additional information:
l
EPAS code (digital nameplate)
l
Serial number
l
Production Date
1.7 Support
To get fast and effective support, make sure to always
provide Customer Service with the following information:
l
Part number
l
Information from the QR code
l
Ambient conditions at the location of use
l
Fuse or other protective element used to protect the device
l
Supply voltage conditions
l
Device firmware version
l
If applicable, build No., version easySoft 8
easyE402/24 MN050009ENEaton.com
35
To Next Page
Loading...
Need help?
General