Saving/Restoring/Duplicating Network module configuration settings
Servicing the Network Management Module – 180
4.16.1.1.1 File block
File block cannot be modified, this is the mandatory structure of the JSON file.
4.16.1.1.2 Feature block
Feature block contains the full definition of a feature.
If it is removed from the JSON file, this feature settings will not be updated/restored in the card.
4.16.1.1.3 Data block
Data block contains all the feature settings values.
a Data block
Data block cannot be modified, this is the mandatory structure of the JSON file.
b Value block
If some values inside the Value block need to be kept, Value block structure cannot be modified, this is the mandatory structure of
the JSON file.
If it is removed from the JSON file, these values will not be updated/restored.
c Values
Values can be kept as is, modified or removed.
Removed values will not be updated/restored.
4.16.1.2 Sensitive data (like passwords)
JSON file structure will slightly varies if sensitive data are exported with passphrase or not.
4.16.1.2.1 The JSON file is saved using passphrase (preferred)
All sensitive data will have below structure:
To Next Page
Loading...
