Eaton Network-M2 - Page 204

 Installing the EMP
Servicing the EMP – 204
•
•
•
•
•
•
Bottom mounting capabilities:
magnets
keyholes
tie wraps
nylon fastener
Side mounting:
magnets
tie wraps
6.3.2.1 Rack mounting with keyhole example
To mount the EMP on the rack, use the supplied screw, washer and nut. Then, mount the EMP on the
screw and tighten it.
6.3.2.2 Rack mounting with tie wraps example
To mount the EMP on the door of the rack, use the supplied cable ties.