Eaton Network-M2 - Page 227

List of event codes
Information – 227
0100B00 Notice Syslog is stopping logSystem.csv
0100D00 Notice Network module is booting logSystem.csv
0100E00 Notice Network module is operating logSystem.csv
0100F00 Notice Network module is starting shutdown sequence logSystem.csv
0101000 Notice Network module is ending shutdown sequence logSystem.csv
0101400 Notice Network module shutdown requested logSystem.csv
0101500 Notice Network module reboot requested logSystem.csv
0100200 Notice <nb alarms> alarms exported and flushed logSystem.csv
0A00100 Info Network module upgrade success <f/w: xx.yy.zzzz> logUpdate.csv
0A00300 Info Network module upgrade started logUpdate.csv
0A00600 Info Network module file system integrity OK <f/w: xx.yy.zzzz> logUpdate.csv
0B00300 Info Time with NTP synchronized logSystem.csv
0B00600 Info Time settings changed logSystem.csv
0B01100 Info Time reset to last known date: "date" logSystem.csv
0C00F00 Info Test email
1000100 Info Settings saving requested logSystem.csv
1000200 Info < feature > settings saved logSystem.csv
1000A00 Info Settings restoration requested logSystem.csv
1000E00 Info < feature > settings restoration success logSystem.csv
1000B00 Info Settings restoration success logSystem.csv
0301500 Notice Sanitization switch changed logSystem.csv
0A01600 Notice Major version downgrade logUpdate.csv
0D00800 Notice DHCP client script called with <script parameters> logSystem.csv
0D00900 Notice IPv4 configuration changed to <ipsv4_address> logSystem.csv
0D01000 Notice IPv6 configuration changed to <ipsv6_address> logSystem.csv
Event with code0700600 is used within shutdown script. The severity may vary according to the event context.