Eaton Network-M2 - Page 233

To Next Page

To Previous Page

List of event codes

Information – 233

2325 Critical Bypass overload No bypass overload -

2328 Critical Bypass thermal overload Bypass thermal OK -

2364 Critical Internal failure End of internal failure -

2402 Critical Parallel UPS not compatible Parallel UPS compatibility OK -

281E Critical Load unprotected - -

7.5.3.2 Warning

Code Severity Active message Non-active message Advice

2000 Warning Inverter voltage too high Inverter voltage OK -

2001 Warning Inverter voltage too low Inverter voltage OK -

2003 Warning Bypass AC over voltage End of bypass AC over voltage -

2004 Warning Bypass AC under voltage No Bypass AC under voltage -

2005 Warning Bypass frequency out of range Bypass frequency in range -

2006 Warning Input AC voltage out of range (+) Input AC voltage in range -

2007 Warning Input AC voltage out of range (-) Input AC voltage in range -

2008 Warning Input AC frequency out of range Input AC frequency in range -

2009 Warning Output voltage too high Output voltage OK -

2010 Warning Output voltage too low Output voltage OK -

2011 Warning Output frequency out of range Output frequency in range -

2021 Warning Charger temperature alarm Charger temperature OK -

2023 Warning Max charger voltage Charger voltage OK -

2025 Warning Power overload No power overload -

2027 Warning Output over current No output over current -

2028 Warning DC bus + too high DC bus + voltage OK -

2029 Warning DC bus + too low DC bus + voltage OK -

2032 Warning Battery breaker closed Battery breaker open -

2057 Warning On battery No more on battery -

2063 Warning Parallel UPS communication lost Parallel UPS communication OK -

2067 Warning Input AC not present Input AC present -

2105 Warning Bypass available Bypass not available -

2106 Warning Utility breaker closed Utility breaker open -

2159 Warning Overload pre-alarm No overload pre-alarm -

2162 Warning Overload alarm No overload -

2168 Warning Battery discharging End of UPS battery discharge -

2169 Warning Bypass mode No more on bypass -

2170 Warning Load not powered - -

2176 Warning Compatibility failure Compatibility OK -

2189 Warning Load not powered - -

2194 Warning Input bad wiring Input wiring OK -

2206 Warning UPS Shutdown requested End of UPS shutdown requested -

2224 Warning Internal configuration failure Internal configuration OK -

Related product manuals