Eaton Network-M2 - Page 85

Settings
Contextual help of the web interface – 85
time
Description
Command used to displayor changetime and date.
Help
For Viewer and Operator profiles:
time -h
Usage: time [OPTION]...
Display time and date.
-h, --help display help page
-p, --print display date and time in YYYYMMDDhhmmss format
For Administrator profile:
time -h
Usage:time[OPTION]...
Display time and date, change time and date.
-h,--helpdisplayhelppage
-p,--printdisplaydateandtimeinYYYYMMDDhhmmssformat
-s,--set<mode>
Modevalues:
-setdateandtime(formatYYYYMMDDhhmmss)
manual<dateandtime>
-setpreferredandalternateNTPservers
ntpmanual<preferredserver><alternateserver>
-automaticallysetdateandtime
ntpauto
Examples of usage:
-> Set date 2017-11-08 and time 22:00
time--setmanual201711082200
-> Set preferred and alternate NTP servers
time--setntpmanualfr.pool.ntp.orgde.pool.ntp.org
Examples of usage
-> Set date 2017-11-08 and time 22:00
time --set manual 201711082200
-> Set preferred and alternate NTP servers
time --set ntpmanual fr.pool.ntp.org de.pool.ntp.org
3.7.1.6.1 For other CLI commands
See the CLI commands in the Information>>>CLI section.