3 Installation
3.2 Mounting
50 DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com
The EMC cable gland must be earthed properly.
A 300-mm-long ground wire is located on the DKA… lock nut. This ground
wire can be cut to length in order to connect it to the PE.
Figure 29: Grounding the EMC cable gland
Figure 30: Schematic diagram of EMC gland assembly
1 2 3 4 5 6 7 8 9 10 11
UVWL1/N L2/N L3
⏚⏚
To Next Page
Loading...
