FUNCTIONS
1 Fuel calculation algorithm Speed Density or Alpha-N
2 Fuel Table 16x16, resolution 0,1% VE
3 Injectors configuration Phase and injection angle, injectors dead time
calibration(16x1), injector flow rate configuration
4 AFR Table 16x16, resolution 0.1 AFR, closed loop feedback
5 Ignition triggers 12 – 60 primary trigger tooth , 0-2 missing tooth, 1 tooth
cam sync synchronization
6 Ignition table 16x16, resolution 0,5˚
7 Ignition coils dwell Dwell time table (16x1), dwell correction table in function
of RPM (16x1)
8 Ignition advance corrections Correction in function of CLT and IAT (16x1), per
cylinder correction
9 IAT, CLT sensors Calibration table (20x1), sensors wizard
10 Cranking fuel table Table 16x1
11 Enrichments ASE, Warmup, Acceleration, Deceleration
12 Knock sensing Resonant frequency, knock window, knock actions like
ignition retard, fuel mixture enrichment
13 Idle control PID based control over stepper motor or idle vale.
Ignition angle control. Idle Target table (16x1)
14 Parametric outputs Fuel pump, radiator fans, tachometer, user defined
15 Boost control PID base, DC table 16x16, Boost target, Gear and speed
dependent
16 Sport functions Launch control, Nitrous injection, flat shift, gear
dependent shiftlight, etc.
17 Variable CAM control VTEC, iVTECm VVTi, VVL, VANOS, DOUBLE VANOS
18 Drive by wire 3D PID model
19 Others Check Engine light, fail save values for sensors,
password protection
20 Log functions Logging over 100 parameters, real time view
Page 10
To Next Page
Loading...