Nitrous Active Information about activation of Nitrous control
Nitrous fuel scale
Fuel dose correction resulting from Nitrous strategy according to
Nitrous Fuel Scale table
Nitrous ign. mod.
Ignition angle correction resulting from Nitrous strategy according to
Nitrous ignition mod. table
None Disable displaying log channel on the graph log
Oil pressure Oil pressure value according to Oil pressure cal. table
Oil temperature Oil temperature value according Oil temperature cal. table
Overdwell Information about ignition coil overdwell (DC >= 100%)
Param. Output #1 The state of Parametric output #1
Param. Output #2 The state of Parametric output #2
Param. Output #3 The state of Parametric output #3
Param. Output #4 The state of Parametric output #4
Pit limiter active Information about activation of Pit limiter strategy
Pit Limiter torque
reduction
Torque reduction (in %) resulting from Pit limiter strategy
PWM #1 DC Duty cycle of PWM#1 output
Rolling anti lag active Information about activation of Rolling anti lag strategy
Rolling anti lag ign.
retard
The ignition angle resulting from Rolling anti lag strategy
Rolling anti lag target The target RPM acquired for Rolling anti lag
RPM Engine speed
RPM 2nd engine
The RPM of the second engine transmitted by ECUMASTER serial
protocol
Shift Light On Information about output state of Shift light
Spark cut percent Information about current spark cut percent
Tables set Information about current selected table set
TC adjust pos Position of sensitivity switch used by Traction control strategy
TC dRPM Corrected value of delta RPM used by Traction control strategy
TC dRPM Raw
The value of delta RPM (how fast the RPM increases) used by
Traction control strategy
TC Torq. Reduction Torque reduction (in %) resulting from Traction control strategy
TPS Current throttle position
Page 130
To Next Page
Loading...