Edimax CAP1300 - Page 107

AP, Managed AP, Repeater & Client Bridge Modes
107
NTP Time Server
Use NTP
The access point also supports NTP (Network Time Protocol)
for automatic time and date setup.
Server Name
Enter the host name or IP address of the time server if you
wish.
Update
Interval
Specify a frequency (in hours) for the access point to
update/synchronize with the NTP server.
Time Zone
Time Zone
Select the time zone of your country/region. If your
country/region is not listed, please select another
country/region whose time zone is the same as yours.
Press “Apply” to apply the configuration, or “Cancel” to forfeit the changes.