Edimax CAP1300 - Page 181

Edimax Pro NMS
181
X-5-1-2-4 Edit Radio Group Settings
Radio Group Settings
Wireless
Enable or disable the access point group’s 2.4GHz or 5GHz
wireless radio. When disabled, no SSIDs on that frequency will
be active.
Band
Select the wireless standard used for the access point group.
Combinations of 802.11b, 802.11g, 802.11n & 802.11ac can
be selected.
Auto Pilot
Enable/disable auto channel selection. Auto channel selection
will automatically set the wireless channel for the access point
group’s 2.4GHz or 5GHz frequency based on availability and
potential interference. When disabled, select a channel
manually.
Auto Pilot
Sensitivity
Select sensitivity of Auto Pilot.
Auto Pilot
Range
Select a range from which the auto channel setting (above)
will choose a channel.