Edimax CAP1300 - Page 205

Edimax Pro NMS
205
Please refer to X-6-2-3 or X-6-3-3 for more information on authentication and
additional authentication types.
Guest Access Policy
Guest Portal
Enable or disable guest portal for the guest network.
Traffic Shaping
Enable or disable traffic shaping for the guest network.
Downlink
Enter a downlink limit in MB.
Uplink
Enter an uplink limit in MB.
Rules
Enter IP addresses to be filtered according to the drop down
menu: “Allow all by Default”, “Deny all by Default”, “Internet
Only” and “Disable”
Exceptions
After selecting the rule above, exceptions can be setup to
allow / deny guest access.
Guest Network Advanced Settings
Schedule
Group
Select a schedule group.
Press “Save” to save the above actions, “Cancel” to forfeit the changes, or
“Save & Apply” to save and apply the above actions.
Clone
Select an entry and clone its settings. You will be taken to the
add guest network settings page shown above. Enter / edit
the fields and save your selection.