Edimax CAP1300 - Page 226

Edimax Pro NMS
226
Date and Time Settings
Local Time
Set the access point’s date and time manually using the drop
down menus.
Acquire
Current Time
from your PC
Click “Acquire Current Time from Your PC” to enter the
required values automatically according to your computer’s
current time and date.
NTP Time Server
Use NTP
The access point also supports NTP (Network Time Protocol)
for automatic time and date setup.
Server Name
Enter the host name or IP address of the time server if you
wish.
Update
Interval
Specify a frequency (in hours) for the access point to
update/synchronize with the NTP server.
Time Zone
Time Zone
Select the time zone of your country/ region. If your
country/region is not listed, please select another
country/region whose time zone is the same as yours.
Press “Save” to save the above actions, “Cancel” to forfeit the changes, or
“Save & Apply” to save and apply the above actions.