Edimax CAP1300 - Page 318

318
# config date 12/12/12 15:30
config firmware
Update the firmware of this product.
<The syntax of the command>
config firmware target tftp server (tftp-server) file (filename)
- <Parameter>
(tftp-server) – Update the firmware from the TFTP server.
(filename) – Set the name of the firmware file.
- <Default configuration>
NA
- <Command mode>
Immediate Mode, Edit Mode, Reference Mode
- <Compatible Products>
CAP1300
- <Examples>
# config firmware target tftp server 192.168.2.100 file CAP1300.bin
config init
Return to the initial value all the parameters that are set in this product.
<The syntax of the command>
config init [force]
- <Parameter>
NA
- <Default configuration>
NA
- <Command mode>
Immediate Mode
- <Compatible Products>
CAP1300
- <Examples>
# config init
# config init force
config led_setting
Set the LED of this product.
<The syntax of the command>
config led_setting {led} {on｜off}
- <Parameter>
{led} – Enter power or diag to set either the power or diag LED
- <Default configuration>
On
- <Command mode>
Immediate Mode