Edimax CAP1300 - Page 320

320
config ntp client
Set the NTP client function of this product.
<The syntax of the command>
config ntp client disable
config ntp client enable server (ntp-server) interval (ntp-interval)
- <Parameter>
(ntp-server) Set the host name or IP address of the NTP server.
(ntp-interval) Set the interval time to query the NTP server. (1~24)
- <Default configuration>
Invalid
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# config ntp client enable server clock.stdtime.gov.tw interval 24
# config ntp client disable
config password
Set the password to log in to the setup screen of this product.
<The syntax of the command>
config password (username) (oldpassword) (newpassword)
- <Parameter>
(username) Specifies the user name.
(oldpassword) Enter the password that is currently set.
(newpassword) Enter the password to the new one.
- <Default configuration>
Administrator Name: admin
Administrator Password: admin
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# config password admin 1234 abc789
config reboot
Reboot of this product.
<The syntax of the command>
config reboot [force]
- <Parameter>
NA
- <Default configuration>
NA
- <Command mode>