Edimax CAP1300 - Page 328

328
- <Parameter>
(dnsserver) Enter the IP address of the DNS server.
- <Default configuration>
DHCP
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# lan ip dns primary 10.10.1.127
# lan ip dns secondary clear
lan ip static
Set the DHCP to static IP.
<The syntax of the command>
lan ip static (ipaddress) subnet_mask (maskip)
- <Parameter>
(ipaddress) Set the ip address of the lan.
(maskip) Set the subnet-mask of the lan.
- <Default configuration>
DHCP
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# lan ip static 192.168.10.100 subnet_mask 255.255.255.0
lan ip show status
Show the status of IP settings.
<The syntax of the command>
lan ip show status
- <Parameter>
NA
- <Default configuration>
NA
- <Command mode>
Immediate Mode, Edit Mode, Reference Mode
- <Compatible Products>
CAP1300
- <Examples>
# lan ip show status