Edimax CAP1300 - Page 342

342
5g Create the multi-SSID on 802.11a.
(num) Create the number of the SSID.(1~5)
- <Default configuration>
5g ssid number: 1
2.4g ssid number: 1
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan 2.4g ssid create 5
wlan {2.4g | 5g} ssid {disable | enable}
Enable or disable the SSID.
<The syntax of the command>
wlan {media} ssid {disable | enable} { ssidname (ssid) | ssidnum (ssidnum)}
- <Parameter>
{media} 2.4g To enable or disable the SSID on 802.11g.
5g To enable or disable the SSID on 802.11a.
(ssid) Specify the SSID to be set.
(ssidnum) Specify the number of the SSID to be set.
- <Default configuration>
Enable
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan 2.4g ssid disable ssidnum 2
# wlan 5g ssid enable ssidname edimax5g01-168801
wlan {2.4g | 5g} ssid loadbalance
Set the loadbalance of the SSID.
<The syntax of the command>
wlan {media} ssid loadbalance { ssidname (ssid) | ssidnum (ssidnum)} limit (num)
- <Parameter>
{media} 2.4g Set the loadbalance of the SSID on 802.11g.
5g Set the loadbalance of the SSID on 802.11a.
(ssid) Specify the SSID to be set.
(ssidnum) Specify the number of the SSID to be set.
(num) Set the number of the loadbalance
- <Default configuration>
50