Edimax CAP1300 - Page 356

356
- <Parameter>
<media> 2.4g Set the radius server of 802.11g.
5g Set the radius server of 802.11a.
(num) Set the time of the session-time (0~86400 sec)
- <Default configuration>
primary session-timeout: 3600
secondary session-timeout: 3600
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# radius 5g secondary session_time 4800
radius {2.4g | 5g} {primary | secondary} accounting
Enable or disable the RADIUS Accounting.
<The syntax of the command>
radius <media> {primary | secondary} accounting (state)
- <Parameter>
<media> 2.4g Set the radius server of 802.11g.
5g Set the radius server of 802.11a.
(state) enable Enable the RADIUS Accounting.
disable Disable the RADIUS Accounting.
- <Default configuration>
enable
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# radius 5g secondary accounting disable
# radius 5g primary accounting disable
radius {2.4g | 5g} {primary | secondary} accounting_port
Set the UDP port of the server used in RADIUS Accounting protocol.
<The syntax of the command>
radius <media> {primary | secondary} accounting_port (port)
- <Parameter>
<media> 2.4g Set the radius server of 802.11g.
5g Set the radius server of 802.11a.
(port) Set the UDP port.(0~65535)
- <Default configuration>
primary: 1813