Edimax CAP1300 - Page 79

AP, Managed AP, Repeater & Client Bridge Modes
79
Airtime
Fairness
Airtime Fairness gives equal amounts of air time (instead of
equal number of frames) to each client regardless of its
theoretical data rate.
Set airtime fairness to “Auto”, “Static” or “Disable”.
When “Auto” is selected, the share rate is automatically
managed.
When “Static” is selected, press “Edit SSID Rate” to enter a %
for each SSID’s share rate as shown below:
The % field has to add up to 100% or the system will display a
message:
Airtime fairness is disabled if “Disable” is selected.
Press “Apply” to apply the configuration, or “Cancel” to forfeit the changes.